BenchK Wooden Wall Bars 111

Some kids are always looking for something to climb. The BenchK 111 gives your kiddo a place to climb and hang at home, with wooden wall bars and a pull-up bar you can move to a suitable height. You can use it for your own stretches and pull-ups, too.

The light beech wood works well in a playroom or shared family space. Start with the wall bars and pull-up bar, then add rings and a rope swing if you want more ways to play. Those accessories are sold separately.

What Comes with the BenchK Wooden Wall Bars 111

• BenchK Series 1 wall bars with eight solid-beech rungs give your kiddo a place for supervised climbing and give you support for stretching.
• The adjustable wooden pull-up bar moves between suitable rung positions for different users and exercises. You can lift it off when you want to use the wall bars on their own.

The A204 gymnastics kit, mat and mounting kits are sold separately.

BenchK 111 Swedish Ladder Dimensions and Materials

• Wall bars: 86⅝ inches high × 25¼ inches wide (220 × 64 cm)
• Minimum installation height: 230 cm; allow at least 90.6 inches when measuring in inches
• Wooden pull-up bar: 22⅛ inches wide × 23 inches deep × 16⅛ inches high (56.2 × 58.5 × 41 cm)
• Wall-bar maximum user weight: 265 lb (120 kg)
• Wooden pull-up bar maximum user weight: 265 lb (120 kg)
• Materials: solid beech wood and beech plywood, with a hand-oiled, light beech finish
• Set weight: 44 lb (20 kg)
• Made in Poland
• Manufacturer warranty: 2 years, subject to its terms and exclusions

The pull-up bar measurements describe that attachment. They don’t give the complete installed distance from the wall or the clear space you’ll need to exercise.

Installing and Using Your BenchK Wooden Wall Bars 111

Before ordering, check your ceiling height and wall construction. The frame needs a suitable vertical wall, secure mounting and support from the floor. Drywall alone cannot hold this equipment.

• Wood-stud walls need the compatible WH1+S4 Series 1 wall-holder kit and suitable structural fasteners.
• Suitable brick or concrete walls need the PS8 masonry-anchor kit for direct mounting. The wall must be at least 12 cm thick; allow at least 4.73 inches. A stud-wall holder isn’t needed for this installation.

Mounting kits are sold separately. Frame assembly fittings are included, but structural wall screws and anchors aren’t. Have a qualified installer check the wall and fasteners. Keep the space around and in front of the equipment clear for the full movement of each exercise. Leave room above and around the pull-up bar.

Use the equipment one person at a time. It isn’t suitable for kids under 3, and kids ages 3–14 need adult supervision. Follow the assembly and safety guide for the wall bars and each attachment.

Read the guides before assembly and use:

• Series 1 wall-bar assembly guide
• PB204/PB076 wooden pull-up bar guide

Browse our BenchK wall bars and accessories to compare setups and compatible pieces.

Ready to give climbing and exercise a place at home? Add the BenchK 111 to your cart.